Fox H350R

Fox H350R
NOT REPAREABLE EXECUTIONTechnical Features:Maximum working pressure (PS): 250-210 bar Test pressure (PT): PS x 1,43 / 1,3 / 1,5 Body: made in painted carbon steelStandard nitrogen valve : ⅝” UNF (R version) Constructive methodology: exectution with caulking, without weldsWorking temperature (TS): from -20°C to +80°C Standard bladder: can be used with mineral oils and non corrosive fluids, not replaceableInstallation: horizontal / vertical (nitrogen valve upward) Compression ratio:- recommended: P2/P0 = 2.5- maximum: P2/P0 = 4Mechanical life: the number of cycles is inversely proportional to the increase of the compression ratio. For pulsation dampener applications, the nitrogen value must be from 60% to 80% of the working pressure also in relation with the type of pump and the working temperature.Warranty: see dedicated page Spare parts: see dedicated page Also available:- Outside epoxy painted as per standard FOX procedure or as project specification- Bladders in HNBR, EPDM, FPM, HYTREL- Connection with flange SAE 3000 – SAE 6000- Connection with flange ANSI B16.5 or UNI/DIN- Special connection on request- H. /LT series for temperature up to – 40°C- H…R series rechargeable with nitrogen valve 5/8” UNF- H…M series rechargeable with nitrogen valve M28x1.5- H…V series not rechargeable with fix nitrogen value- Version 310 bar
  • Product Attributes

    • Nitrogen VolumeLt
      • 0.35
    • Max N2 PrechargeBar
      • 160.0
    • Hydraulic Connection
      • M18x1.5-F
  • Pressure Attributes

    • Max PressureBar
      • 250.0
  • Flow Attributes

    • Max Flowl/min
      • 35.0
  • Dimensions

    • Cmm
      • 23
    • Dmm
      • 70.0
    • Hmm
      • 190.0

Gevonden waar u naar op zoek bent?

Wij komen graag in contact met u om de mogelijkheden te bespreken, of om verdere uitleg te geven. Neem vrijblijvend contact met ons op!

Offerte aanvragen