Fox HST0.7

Fox HST0.7
THREADED EXECUTION, REPARABLETechnical Features:Maximum working pressure (PS): 300 bar Test pressure (PT): PS x 1,43 / 1,3 / 1,5 Body: made in painted carbon steel Standard nitrogen valve : ⅝” UNF Working temperature (TS): -20°C ÷ +80°CStandard diaphragm: can be used with mineral oils and non corrosive fluidsInstallation: horizontal / vertical (nitrogen valve upward) Compression ratio:- recommended: P2/P0 = 2.5- maximum: P2/P0 = 6Mechanical life: the number of cycles is inversely proportional to the increase of the compression ratio. For pulsation dampener applications, the nitrogen value must be from 60% to 80% of the working pressure also in relation with the type of pump and the working temperature.Warranty: see dedicated page Spare parts: see dedicated page Available :- Outside epoxy painted as per standard FOX procedure or as project specification- Internal lining in different materials- Diaphragm in HNBR, EPDM, FPM , HYTREL- Connection with flange SAE 3000 – SAE 6000, ANSI B16.5 or UNI/DIN- Special connection on request- LT series for temperatures up to –40 °C- M series rechargeable with nitrogen valve M28x1.5- V series not rechargeable with a fixed nitrogen preload in the factory- S series for separator of fluid- High pressure execution- Available volumes up to 20 liters
  • Product Attributes

    • Nitrogen VolumeLt
      • 0.7
    • Max N2 PrechargeBar
      • 210.0
    • Hydraulic Connection
      • M18x1.5-F
  • Pressure Attributes

    • Max PressureBar
      • 300.0
  • Flow Attributes

    • Max Flowl/min
      • 55.0
  • Dimensions

    • B
      • 80
    • Cmm
      • 22
    • Dmm
      • 100.0
    • Hmm
      • 218.0

Gevonden waar u naar op zoek bent?

Wij komen graag in contact met u om de mogelijkheden te bespreken, of om verdere uitleg te geven. Neem vrijblijvend contact met ons op!

Offerte aanvragen