Fox HST1.5
THREADED EXECUTION, REPARABLETechnical Features:Maximum working pressure (PS): 300 bar Test pressure (PT): PS x 1,43 / 1,3 / 1,5 Body: made in painted carbon steel Standard nitrogen valve : ⅝” UNF Working temperature (TS): -20°C ÷ +80°CStandard diaphragm: can be used with mineral oils and non corrosive fluidsInstallation: horizontal / vertical (nitrogen valve upward) Compression ratio:- recommended: P2/P0 = 2.5- maximum: P2/P0 = 6Mechanical life: the number of cycles is inversely proportional to the increase of the compression ratio. For pulsation dampener applications, the nitrogen value must be from 60% to 80% of the working pressure also in relation with the type of pump and the working temperature.Warranty: see dedicated page Spare parts: see dedicated page Available :- Outside epoxy painted as per standard FOX procedure or as project specification- Internal lining in different materials- Diaphragm in HNBR, EPDM, FPM , HYTREL- Connection with flange SAE 3000 – SAE 6000, ANSI B16.5 or UNI/DIN- Special connection on request- LT series for temperatures up to –40 °C- M series rechargeable with nitrogen valve M28x1.5- V series not rechargeable with a fixed nitrogen preload in the factory- S series for separator of fluid- High pressure execution- Available volumes up to 20 liters
Product Attributes
- Nitrogen VolumeLt
- 1.5
- Max N2 PrechargeBar
- 210.0
- Hydraulic Connection
- M18x1.5-F
- Nitrogen VolumeLt
Pressure Attributes
- Max PressureBar
- 300.0
- Max PressureBar
Flow Attributes
- Max Flowl/min
- 55.0
- Max Flowl/min
Dimensions
- B
- 160
- C
- 22
- Dmm
- 138.0
- Hmm
- 270.0
- B
Gevonden waar u naar op zoek bent?
Wij komen graag in contact met u om de mogelijkheden te bespreken, of om verdere uitleg te geven. Neem vrijblijvend contact met ons op!
Offerte aanvragen