Fox HTR20

Fox HTR20
Technical Features:Maximum working pressure (PS): 250-210- 150 barTest pressure (PT): PS x 1,43 / 1,3 / 1,5 Body: made in painted carbon steel Standard nitrogen valve : ⅝” UNFWorking temperature (TS): from -20°C to +80°C Standard bladder: can be used with mineral oils and non corrosive fluidsInstallation: horizontal / vertical (nitrogen valve upward) Compression Ratio:- recommended: P2/P0 = 2.5- maximum: P2/P0 = 4Mechanical life: the number of cycles is inversely proportional to the increase of the compression ratio. For pulsation dampener applications, the nitrogen value must be from 60% to 80% of the working pressure also in relation with the type of pump and the working temperature.Warranty: see dedicated page Spare parts: see dedicated page Available:- Outside epoxy painted as per standard FOX procedure or as project specification- Internal lining in different materials- Bladders in HNBR, EPDM, FPM- Connection with flange SAE 3000 – SAE 6000, ANSI B16.5 or UNI/DIN- Special connection on request- LT series for temperature of – 40°C- S series for separator of fluidOn request, according to: CE (2014/68/EU- PED)  KOSHA (Korea) ATEX (2014/34/EU)  SELO (China)
  • Product Attributes

    • Nitrogen VolumeLt
      • 19.5
    • Max N2 PrechargeBar
      • 100.0
    • Hydraulic Connection
      • 2”BSP-F
  • Pressure Attributes

    • Max PressureBar
      • 150.0
  • Flow Attributes

    • Max Flowl/min
      • 600.0
  • Dimensions

    • B
      • 110
    • Cmm
      • 15
    • Dmm
      • 220.0
    • Hmm
      • 845.0

Gevonden waar u naar op zoek bent?

Wij komen graag in contact met u om de mogelijkheden te bespreken, of om verdere uitleg te geven. Neem vrijblijvend contact met ons op!

Offerte aanvragen