Fox HG150

Maximum working pressure (PS): Up to 50 bar Test Pressure (PT): PS x 1,43 / 1,3 / 1,5 Material: carbon steelWorking temperature (TS): -20°C / +80°C Standard bladder: polyurethane; suitable for mineral oils, fuels and non-corrosive fluids Standard nitrogen valve: ⅝” UNF or M28x1.5 Installation: vertical (nitrogen valve upward) Compression ratio:- recommended: P2/P0 = 2.5- maximum: P2/P0 = 4Mechanical life: the number of cycles is inversely proportional to the increase of the compression ratio. For pulsation dampener applications, the nitrogen value must be from 60% to 80% of the working pressure also in relation with the type of pump and the working temperatureWarranty: see dedicated page Spare parts: see dedicated page Available:- Outside epoxy painted as per standard FOX procedure or as project specification- Bladders in IIR, NBR, FPM, ECO- Connection with flange SAE 3000 – SAE 6000, ANSI B16.5 or UNI/DIN- Special connection on request- HGX series in AISI 304L/316L- High pressure version till 50 barg- Volume up to 5000 litersOn request, according to: CE (2014/68/EU- PED)  KOSHA (Korea) ATEX (2014/34/EU)  SELO (China)