Fox HTR6.5

Technical Features:Maximum working pressure (PS): 250-210- 150 barTest pressure (PT): PS x 1,43 / 1,3 / 1,5 Body: made in painted carbon steel Standard nitrogen valve : ⅝” UNFWorking temperature (TS): from -20°C to +80°C Standard bladder: can be used with mineral oils and non corrosive fluidsInstallation: horizontal / vertical (nitrogen valve upward) Compression Ratio:- recommended: P2/P0 = 2.5- maximum: P2/P0 = 4Mechanical life: the number of cycles is inversely proportional to the increase of the compression ratio. For pulsation dampener applications, the nitrogen value must be from 60% to 80% of the working pressure also in relation with the type of pump and the working temperature.Warranty: see dedicated page Spare parts: see dedicated page Available:- Outside epoxy painted as per standard FOX procedure or as project specification- Internal lining in different materials- Bladders in HNBR, EPDM, FPM- Connection with flange SAE 3000 – SAE 6000, ANSI B16.5 or UNI/DIN- Special connection on request- LT series for temperature of – 40°C- S series for separator of fluidOn request, according to: CE (2014/68/EU- PED)  KOSHA (Korea) ATEX (2014/34/EU)  SELO (China)